Polyimide (P84) needle felt for dust collector systems

Standard sample:
Material: 100% P84 fiber / P84 scrim
Weight: 500g/sq.m
Thickness:1.8mm
Air Permeability: 280 L/ m2. S @200pa
Tensile strength: Warp: >700N/5cm; Weft :> 1200N /5cm
Elongation : Warp: < 35%; Weft: <55%
Service Temperature: Continues: <260℃; Peaks: 280℃
Shrinkage (at 260℃):<1%.
Surface treatment:singed & glazed, heat set.

The other finish treatment available is PTFE bathing and membrane.
P84(PI-polyimide) is the material with the properties of flame resistance, high temperature resistance. Polyimide will keep a good performance when the temperature up to 240 degree centigrade,instant can up to 260 degree to 300 degree. Polyimide is leaf-shaped structure with a larger filter surface, and always embeded in the surface of other needle felt with different material to improve the filter efficiency. For the properties of high Temperature resistant Filter material, good chemical resistance, good air permeability, high filtration efficiency, mostly applied in Cement kiln, Asphalt, Waster Incinerator, coal boilers, etc.

Note:

  1. special specification can be customized.
  2. maximum width: 2.3 meters.
  3. both filter cloth rolls and filter bags are available from Fiberflow Filtration.

RELEVANT INFORMATION:

  1. About the maintenance problems of pulse jet bag filter.
  2. Why some filter bags need water & oil repellent treatment?
  3. The advantages of fiber glass dust collector bag.
  4. The special chemical properties of PPS fiber.
  5. The properties of PTFE membrane dust filter bag.
  6. The filter bags designed for cement plants.
  7. The main problems may happen on filter bags, solutions!
  8. Aramid (Nomex*)filter bags for asphalt mixer fume removal.
  9. The innovative PPS dust filter bags for thermal power plants.